Schneider Authorized Switchgear
BlokSeT and PrismaSeT low-voltage systems built under Schneider Electric licence and design rules, type-tested and CE-certified in Zhenxiang’s own configuration. MVnex and Prisma E are also Schneider-authorised and listed under their voltage class.
Product family
2 product families
Representative Schneider Electric illustrationSchneider BlokSeT low-voltage switchboard
Representative Schneider Electric illustrationSchneider PrismaSeT low-voltage switchboard
Selection guide
Which board is used where?
Selection depends on where the supply comes from, the current to be carried, the site conditions and whether the installation can be interrupted for maintenance. Final values follow the single-line diagram, selectivity study and short-circuit calculation.
| Family | Location and role | Typical rating | Key equipment |
|---|---|---|---|
| BlokSeT | Main distribution and motor control | ≤ 7000 A; Icw 100 kA | Withdrawable / fixed; forms 1–4b; CE |
| PrismaSeT | Prefabricated distribution up to 4000 A | IEC 61439 | Authorised Dec 2025 – Dec 2028; CE |
| MVnex | Medium-voltage intake | 12 / 24 kV | Listed under Medium Voltage Switchgear |
| Prisma E | Modular distribution boards | 100–3200 A | Listed under Distribution Boards |
Design principles
Standards and design principles
Schneider design rules
Panels follow Schneider Electric assembly instructions with Schneider breakers, drawers and busbar systems.
Own type tests
Zhenxiang holds its own type-test, temperature-rise, seismic, salt-spray, arc and IP reports on the licensed builds.
CE certification
TÜV Rheinland CE certificates on BlokSeT, PrismaSeT, Prisma E and MVnex.
Authorisation
Licences valid to 2026 (BlokSeT), 2028 (PrismaSeT), 2027 (Prisma E and MVnex); renewed with Schneider audits.
Production process
From enquiry to commissioning
Design, production and testing sit under one roof, so responsibility stays at one point from the first drawing to site support.
- Enquiry and analysisSend a single-line diagram, load list or panel schedule. An engineer confirms voltage, short-circuit level, forms of separation and applicable standards within 24 hours.
- Proposal and drawingsBudgetary quotation in five working days, then general-arrangement drawings, busbar sizing and a bill of materials for approval.
- Order and engineeringApproved drawings release procurement of Schneider, ABB or specified components and sheet-metal programming.
- Fabrication and assemblyLaser cutting, CNC bending, powder coating, busbar processing, primary assembly and secondary wiring in Shaoshan.
- Factory acceptance testDielectric, loop-resistance, insulation, earth-continuity, IP and current-injection tests; customers and consultants welcome to witness.
- Delivery and after-salesExport packing, sea or air freight, commissioning support and a 7×24 service line with Schneider-trained engineers.
Let's confirm the right board for your project
Send a single-line diagram, load list or a plain list of requirements. Our engineers set the board type, form of separation and ratings with you.