‹ ABB Authorized Switchgear

MDrail-E

ABB MDrail-E power distribution and control cabinets

10–630 A · IEC 61439 · UL 891 · 1008 · 508A

MDrail-E is ABB's modular range of power distribution and control boxes and cabinets. Zhenxiang builds it under an ABB partner certificate, integrating specified ABB devices, with its own type-test reports from 10 A to 630 A. UL has issued Certificates of Compliance for MDrail E distribution boards (UL 891), MDrail-E-700 transfer switches (UL 1008) and industrial control panels (UL 508A).

Request a quotation Certificates
MDrail-E ABB MDrail-E power distribution and control cabinets
Official ABB product imagery, shown as representative illustrations. These are not photographs of equipment manufactured or delivered by Zhenxiang Electric.

Tested and certified

UL 891 · UL 1008 · UL 508A

Built for

Sub-distribution and final circuits, Automatic transfer switching, VFD and control panels.

Standards

IEC 61439-1 / -2, UL 891, UL 1008, UL 508A.

Technical data

ParameterValue
ABB authorisationPower Distribution and Control Box/Cabinet Partner, certificate C2026-1059349-MDrail-E
Type tests10–400 A and 100–630 A ranges (reports 03401-25-07028C-S and -07029C-S, updated November 2025)
UL 891Certificate of Compliance UL-US-2580986-0; models MDrail E 40, 50, 80, 175, 350 and 600
UL 1008Certificate of Compliance UL-US-2578922-0; transfer switches, model MDrail-E-700 (700 A)
UL 508ACertificate of Compliance UL-US-2587000-0; industrial control panels, MDrail-E-200 VFD panel (200 A FLC, 35 kA)

Standards

  • IEC 61439-1 / -2
  • UL 891
  • UL 1008
  • UL 508A

Applications

  • Sub-distribution and final circuits
  • Automatic transfer switching
  • VFD and control panels
  • Data-centre MEP

Production process

From enquiry to commissioning

  1. Enquiry and analysisSend a single-line diagram, load list or panel schedule. An engineer confirms voltage, short-circuit level, forms of separation and applicable standards within 24 hours.
  2. Proposal and drawingsBudgetary quotation in five working days, then general-arrangement drawings, busbar sizing and a bill of materials for approval.
  3. Order and engineeringApproved drawings release procurement of Schneider, ABB or specified components and sheet-metal programming.
  4. Fabrication and assemblyLaser cutting, CNC bending, powder coating, busbar processing, primary assembly and secondary wiring in Shaoshan.
  5. Factory acceptance testDielectric, loop-resistance, insulation, earth-continuity, IP and current-injection tests; customers and consultants welcome to witness.
  6. Delivery and after-salesExport packing, sea or air freight, commissioning support and a 7×24 service line with Schneider-trained engineers.

Quote this product

Send the single-line diagram, short-circuit level and panel schedule; a budgetary quotation follows within five working days.

Request a quotation