‹ ABB Authorized Switchgear

MDmax ST

ABB MDmax ST low-voltage switchgear

400–6300 A · IEC 61439 · CE · CB · UL 891

MDmax ST is ABB's low-voltage switchgear platform for main distribution and motor control. Zhenxiang builds it as an ABB Licensed Panel Builder, with its own type-test reports from 400 A to 6300 A, TÜV Rheinland CE and IECEE CB certificates for the 4000–6300 A main-busbar range, and a UL 891 Certificate of Compliance for the MDmax-ST 4500 model.

Request a quotation Certificates
MDmax ST ABB MDmax ST low-voltage switchgear
Official ABB product imagery, shown as representative illustrations. These are not photographs of equipment manufactured or delivered by Zhenxiang Electric.

Tested and certified

CE · IECEE CB · UL 891

Built for

Data-centre main switchboards, Generator and paralleling boards, Motor control centres.

Standards

IEC 61439-1 / -2, UL 891.

Technical data

ParameterValue
ABB authorisationLicensed Panel Builder, MDmax ST Low Voltage Switchgear, certificate C2026-1059349-MDmax ST
Type tests400–1600 A, 1600–4000 A and 4000–6300 A main-busbar ranges (reports 03401-25-07025C-S, -07026C-S and -07027C-S, updated November 2025)
CETÜV Rheinland, Low Voltage Directive 2014/35/EU, registration AN 50711423 0001; main busbar 4000–6300 A
IECEE CBCertificate HU-006195, IEC 61439-1 and -2:2020; main busbar 4000–6300 A
UL 891Certificate of Compliance UL-US-2580957-0 (US) and UL-CA-2559360-0 (Canada); model MDmax-ST 4500, 480 V, 4500 A, 65 kA

Standards

  • IEC 61439-1 / -2
  • UL 891

Applications

  • Data-centre main switchboards
  • Generator and paralleling boards
  • Motor control centres
  • Industrial plants

Production process

From enquiry to commissioning

  1. Enquiry and analysisSend a single-line diagram, load list or panel schedule. An engineer confirms voltage, short-circuit level, forms of separation and applicable standards within 24 hours.
  2. Proposal and drawingsBudgetary quotation in five working days, then general-arrangement drawings, busbar sizing and a bill of materials for approval.
  3. Order and engineeringApproved drawings release procurement of Schneider, ABB or specified components and sheet-metal programming.
  4. Fabrication and assemblyLaser cutting, CNC bending, powder coating, busbar processing, primary assembly and secondary wiring in Shaoshan.
  5. Factory acceptance testDielectric, loop-resistance, insulation, earth-continuity, IP and current-injection tests; customers and consultants welcome to witness.
  6. Delivery and after-salesExport packing, sea or air freight, commissioning support and a 7×24 service line with Schneider-trained engineers.

Quote this product

Send the single-line diagram, short-circuit level and panel schedule; a budgetary quotation follows within five working days.

Request a quotation