‹ Prefabricated Substation
Prefab power modules
Containerised power modules and E-house
Containerised · Factory-tested
Zhenxiang supplies the electrical fit-out of prefabricated power modules: distribution containers, generator containers, fan-wall and cold-station containers, and the small three-box kits (distribution box, control box, metering box) that the prefab installer fixes on site. Modules ship factory-tested so commissioning on site is reduced to cable connection and functional checks.
Tested and certified
Type-tested to the standards listed below.
Built for
Prefabricated data halls, Modular generator plant, Edge data centres.
Standards
IEC 61439, GB 7251.
Technical data
| Parameter | Value |
|---|---|
| Module types | Distribution container, generator container, IT container, cold-station container, fan-wall container |
| Content | LV switchboards, DPF01 row PDUs, XM distribution boxes, control boxes, busbar |
| Reference projects | NTP-F Prefabs (Malaysia, 2024); KTP-B / C1 / G / J1 / J2, NTP-H / J1 / J2 / K / L prefab installation projects; CTP-B / C (Thailand); NDP-C (Indonesia) |
| Lead time | 100 panels in 30 days; scaling to 400 panels in 60 days |
Standards
- IEC 61439
- GB 7251
Applications
- Prefabricated data halls
- Modular generator plant
- Edge data centres
Production process
From enquiry to commissioning
- Enquiry and analysisSend a single-line diagram, load list or panel schedule. An engineer confirms voltage, short-circuit level, forms of separation and applicable standards within 24 hours.
- Proposal and drawingsBudgetary quotation in five working days, then general-arrangement drawings, busbar sizing and a bill of materials for approval.
- Order and engineeringApproved drawings release procurement of Schneider, ABB or specified components and sheet-metal programming.
- Fabrication and assemblyLaser cutting, CNC bending, powder coating, busbar processing, primary assembly and secondary wiring in Shaoshan.
- Factory acceptance testDielectric, loop-resistance, insulation, earth-continuity, IP and current-injection tests; customers and consultants welcome to witness.
- Delivery and after-salesExport packing, sea or air freight, commissioning support and a 7×24 service line with Schneider-trained engineers.
Also in prefabricated substation
SCB13 · SCB18 · S13-M · S22-M
Distribution transformers, dry-type and oil-immersed
Cast-resin SCB13 and high-efficiency SCB18 at 500 and 2000 kVA; sealed oil-immersed S13-M and S22-M at 400 and 1250 kVA. Type-test and en...
10 kV400–2000 kVAEfficiency reports
Product detail
Prefabricated compact substation
RMU, transformer, LV board, metering and compensation in one honeycomb double-wall enclosure; tested at 800, 1000, 1250 kVA and 3150 kVA...
12 / 0.4 kV800–1250 kVA0.69 kV / 3150 kVA
Product detail
Quote this product
Send the single-line diagram, short-circuit level and panel schedule; a budgetary quotation follows within five working days.